NES 101 video add-on board, power led and 3D Printed Back *A/V out* NES top load

VIDEO BOARD, 3D PRINTED BACK PANEL and POWER LED ONLY NES NOT INCLUDED !!!
This 3d Printed back panel is printed using PLA filament and it is printed at normal speed to avoid any imperfections. I have other colors available, including RED, BLACK, and WHITE. This will avoid making holes on your console, if you ever want to upgrade to RGB in the future you can easily remove this and add an SNES style back panel that I will also be offering soon.

The NES 101 (NES2 or TOP LOADER) is the improved version of the Nintendo Entertainment System (NES). It's redesigned smaller has cartridge port on top. These units are more reliable since it does not have the NES10 lockout chip and tend not to damage the game cart since no need to insert it and push down weakening the pins on the console and cartridge. Unfortunately, these models did not have the composite video or audio out (AV RCA OUT). But with this add-on board, you can add composite video out. I provide a self-contained kit, all wires are soldered on to the RCA connectors and amp is attached to 3d printed back panel. All you need to do is remove the RF adapter and power connector and solder 4 wires. The wires are color coded and when you purchase it I will send you the instructions on how to get this installed.

If you do not feel comfortable installing this on your system, I also offer installation service that I add a video board and have audio out with a power led added to this as well. Please look at my other auctions if you are interested in that.

I include the following
1 pre-assembled Video board with 3D Printed back panel all wires attached to RCAs
1 Pre-wired RED led ready to solder in
1 power jack 2.1MMx5.5MM same as NES original (if you have aftermarket power adapter might not fit please check before purchasing)

Link to step by step instructions (emailed to you).

If you have any questions I am also available by email if the pictures and step-by-step guide is not enough.

You will need the following tools (NOT INCLUDED).
Security Bit 4.5 mm (Gamebit) can be found here on eBay for around $3
Small Phillips screwdriver
Small flat head screwdriver
Soldering Iron (preferably with a small tip)
Solder sucker / Solder wick
Tin Solder
Drill
an NES 101 (NES2)
and Possibly a small file.
***Please note that the Nintendo upgrade should only be attempted by a person with adequate soldering skills and equipment. No warranty is expressed or implied.

I also offer many other services for retro consoles.